Memory Function

The value or end result of each completed measurement is automatically saved. The last 10 values (measured values or end results) are saved. If the memory is full, the oldest value will be overwritten. The oldest value is at position 1 in the memory, the newest value at position 10 (for 10 available memory values).

  1. Press the  button as many times as needed for the indicator for the memory value display  to appear in the (g) line on the display (1).
  2. The last value will be displayed.
  3. Press the  button or  button to scroll through the saved values.

The number of the memory value is shown on the top left, the corresponding measuring function is shown underneath this, and the corresponding memory value is shown at the bottom. If there is no value available in the memory, "0.000" is shown at the bottom of the display and "0" at the top.

Deleting Memory Values

  1. To delete the displayed value, press the  button.
If the measuring tool is switched off during the memory function, the memory value shown on the display will be deleted.