Operation with Power Supply (accessory) (see figure B)

Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the type plate of the power supply.

For mains operations, use only a USB Type C power supply with Power Delivery (USB-PD). Its output voltage, minimum output current and output power must comply with the requirements in the "Technical Data" section. Consult the operating instructions for the power supply. Using different power supplies can damage the speaker. If the power supply provides insufficient power, the speaker will switch itself off.

Open the protective cap of the connector compartment (17). Connect the power supply to the input port (15) of the speaker via a suitable cable. Connect the power supply to the mains supply.

After removing the cable for the power supply, reattach the protective cap of the connector compartment (17) to protect against dirt/debris.

If it fits, you can secure the power supply to the speaker with the rubber mount (12) to store it.