Battery charge indicator
The battery charge indicator indicates the state of charge for a few seconds when the on/off switch is pressed halfway.
LED | Capacity |
|---|---|
3× continuous green light | 60–100 % |
2× continuous green light | 30–60 % |
1× continuous green light | 5–30 % |
1× flashing green light | 0–5 % |
Temperature monitoring/overload protection indicator
The red LED indicator helps you to protect the rechargeable battery against overheating and the motor against overload.
If the LED indicator is lit up permanently in red, the temperature of the rechargeable battery is too high and the power tool switches off automatically.
- Switch the power tool off.
- Allow the battery to cool down before you carry on working.
If the LED indicator is flashing red, then the power tool is blocked and will switch off automatically.
Pull the power tool out of the workpiece.
The power tool will continue to work as soon as the blockage is rectified.