Technical Data
AAC Block cutter | GAC 250 | |
|---|---|---|
Article number | 3 601 BB6 0.. | |
Rated power input | W | 1200 |
Chain speed at no load | m/s | 12 |
Chain bar length | cm | 33.5 |
Saw chain type | 3/8"–50 | |
Drive link thickness | mm | 1.3 (0.050") |
Number of drive links | 44 | |
Tool-free chain tensioning (SDS) | ● | |
Nose sprocket | ● | |
Front brake | ● | |
Run-out brake | ● | |
Stop | ● | |
Weight according to EPTA-Procedure 01:2014 | kg | 4.7 |
Protection class |
|
/ IIThe specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions. Malfunctions are not to be expected for system impedances below 0.25 ohm.
The specifications apply to the specified rated voltages. These specifications may vary at different voltages and in country-specific models.
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.