Cordless Rotary Hammer with SDS plus
Your Selection
Your Selection
Part Number: 0 611 905 300
not available
Find a local dealerIncluded in this variant
Your Selection
Part Number: 0 611 905 304
available at Bosch Partner
Available from our partnersIncluded in this variant
Your Selection
Part Number: 0 611 905 374
not available
Find a local dealerIncluded in this variant
The most important data |
|
|---|---|
| Impact energy (according to EPTA 05/2016)* | 1 J |
| Impact rate at rated speed* | 0 – 4,950 bpm |
| Rated speed* | 0 – 1,050 rpm |
| Battery voltage* | 18.0 V |
| Tool holder | SDS plus |
| Packaging dimensions (width x length x height)** | 185 x 305 x 105 mm |
| Weight incl. battery* | 2.1 kg |
* You can find more information about the deviations in the following link:
** May have small deviations because of variations during production process. You can find more information about the deviations in the following link:
The GBH 18V-LI Compact Professional is the lightest tool within Bosch’s 18 V SDS plus cordless rotary hammer category. Its small housing design of 278 mm and lightweight components are optimized for overhead drilling, enabling it to perform in hard-to-reach spaces. The rotary hammer also features an LED light for illuminating workspaces and improving work visibility.
This tool is intended for drilling in concrete, masonry, wood, and metal. It is compatible with various dust attachments, as well as all Bosch Professional 18 V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.
The GBH 18V-LI Compact Professional also includes features such as Charge Level Indicator, Electronic Motor Protection (EMP), Rotation Control Clutch, and Variable Speed.
European Power Tool Association (EPTA) Procedure 05 provides a common method for the determination of the single impact energy for rotary hammers and breakers.
It defines a standardized measurement method, which ensures comparability between different tools and member companies.
The parameters defined in this procedure are standardized, whereas the real parameters can vary, e.g. due to different working conditions, bit dimensions, condition of work piece.
